Creating Light Painting
Moving the light source
The light can either be used to selectively illuminate parts of the subject or to "paint" a picture by shining it directly into the camera lens. Light painting requires a sufficiently slow shutter speed, usually a second or more. Like night photography, it has grown in popularity since the advent of digital cameras because they allow photographers to see the results of their work immediately.
Light painting can take on the characteristics of a quick pencil sketch. Pablo Picasso was photographed in 1949 doing a quick sketch in the air.[1]
Flash lights or light pens can also be used to create Full Bleed images. Different colored lights can be used to project an image on the CCD.
Moving the camera
Light painting by moving the camera, also called camera painting, is the antithesis of traditional photography. At night, or in a dark room, the camera can be taken off the tripod and used like a paintbrush. An example is using the night sky as the canvas, the camera as the brush and cityscapes (amongst other light sources) as the palette. Putting energy into moving the camera by stroking lights, making patterns and laying down backgrounds can create abstract artistic images. Also known as "Camera Toss."
Making a light painting doesn't necessarily need to be done in a dark room or at night. Sometimes using artificial light, like LEDs and mobile phones, or through the limited sunlight beaming in a curtained room creates a shadowing effect. Using a mirror creates a double image, which adds up to a more creative result.
Technique and equipment
A variety of light sources can be used, ranging from simple flashlights to dedicated devices like the Hosemaster, which uses a fiber optic light pen.[2] Other sources of light including candles, matches, lighter flints, glowsticks, and Poi are also popular.
A tripod is usually necessary due to the long exposure times involved. Alternatively, the camera may be placed on or braced against a table or other solid support. A shutter release cable or self timer is generally employed in order to minimize camera shake. Color Gels can also be used to color the light sources.
Manual focus is often used since autofocus systems may not perform well in low light. In addition, photographers often use a slow film speed or low ISO setting on a digital sensor to minimize grain (or digital noise) and increase exposure tolerance, as evaluating exposure is often tricky.




0 comments:
Post a Comment